Новый PARKER PLANT RoadStar 1500
цена по запросу
Асфальтный завод
2021
Германия, Finowfurt near Berlin
Новый асфальтный завод MARINI Magnum 80 fully mobile asphalt plant
PDF
Поделиться
PDF
Поделиться
Связаться с продавцом
Марка
MARINI
Модель
Magnum 80 fully mobile asphalt plant
Тип
асфальтный завод
Год выпуска
2021
Наработка
1 м/ч
Место расположения
Германия Finowfurt near Berlin
Дата размещения
30 сен 2021
Machineryline ID
WP2122
Описание
Производительность
80 т/ч
Состояние
Состояние
новый
Удаленная инспекция
Запросите независимую техническую экспертизу
Важно
Данное предложение носит ознакомительный характер. Точную информацию запрашивайте у продавца.
Советы по покупке
Контакты продавца
BSS heavy machinery GmbH
В продаже:
68 объявлений
Продавец на Machineryline: 13 лет
Телефоны проверены
Похожие объявления
Новый PARKER PLANT RoadStar 1500
цена по запросу
Асфальтный завод
2021
Германия, Finowfurt near Berlin
Новый PARKER PLANT SRM 60
цена по запросу
Асфальтный завод
2021
60 т/ч
Германия, Finowfurt near Berlin
Новый PARKER PLANT RoadStar 2000
цена по запросу
Асфальтный завод
2021
Германия, Finowfurt near Berlin
Новый STAINMANN Мобильная грунтосмесительная установка
цена по запросу
Асфальтный завод
2021
300 т/ч
Германия, Lahr/Schwarzwald
Новый Sulphur additive Unit
цена по запросу
Асфальтный завод
01/2021
Германия, Ettenheim
Новый POLYGONMACH
цена по запросу
Асфальтный завод
2021
450 кВт
Германия




year: NEW
capacity: up to 80 t./h
1 year guarantee
- calorific power of the fuel 9,600 kcal / kg;
- material passing through the #8 (2,38mm) sieve is no more than 20%;
- The equipment was developed in order to facilitate the transportation as much as possible without the need of pilot cars. Simply hook up the equipment to the asphalt binding agent storage and fuel system.
- Chassis is built with a highly resistant I-Beam with a forged king pin, 3 axles with special tires, suspension springs, air brakes, tank, and safety valve, highway signaling system, mechanical foot with telescopic support.
- Three cold feed bins with 7m3 each developed to hold charges during the cold material loading and provide a
better material flow .
- 50.8CM feeder belt with idle rollers diameter 10.6cm with permanent lubrication. The gear box is hooked
directly to the drum shaft. Drums are regulated with oscillating and shielded bearings. 3hp electric motors.
- 60.96cm conveyor belt with idle rollers diameter 10.6cm , V shielded rollers actuated by a 5hp electric motor.
- Automatic vibrator system for one bin, which facilitates the flowing of fine aggregates with high humidity ratios in one of the bins.
DRYER
- Feeding belts with 20" wide canvas supported by 4" rollers in "V" with permanent lubrication. The gear box is hooked directly to the drum shaft. Drums are regulated with oscillating and shielded bearings. 3-hp electric motor.
- Conveyor belt in U-Beam, 24 wide canvas supported by 4 rollers in V shielded rollers actuated by a 7.5hp electric motor.
- Sieve with a screen for eliminating oversized materials.
- Drum dryer and mixer with heat insulation, four driven supports rollers made of high carbon steel driven by gear box, electric motor 15hp.
- rotational external mixer
- burner with fuel spraying by gear pump 10.000.000 Kcal/h
- Dry filtering system that consists of dust collecting system
- Control system Sistex
complete offer and details by request * more machines, mixing plants and trucks on our website показать контакты
year: NEW
capacity: up to 80 t./h
1 year guarantee
- 3% weighted average of humidity in the aggregates;
- installation at sea level;
- calorific power of the fuel 9,600 kcal / kg;
- material passing through the #8 (2,38mm) sieve is no more than 20%;
- ambient temperature of 15°C to 20°C;
- The equipment was developed in order to facilitate the transportation as much as possible without the need of pilot cars. Simply hook up the equipment to the asphalt binding agent storage and fuel system.
- Chassis is built with a highly resistant I-Beam with a forged king pin, 3 axles with special tires, suspension springs, air brakes, tank, and safety valve, highway signaling system, mechanical foot with telescopic support.
- Three cold feed bins with 7m3 each developed to hold charges during the cold material loading and provide a
better material flow .
- 50.8CM feeder belt with idle rollers diameter 10.6cm with permanent lubrication. The gear box is hooked
directly to the drum shaft. Drums are regulated with oscillating and shielded bearings. 3hp electric motors.
- 60.96cm conveyor belt with idle rollers diameter 10.6cm , V shielded rollers actuated by a 5hp electric motor.
- Automatic vibrator system for one bin, which facilitates the flowing of fine aggregates with high humidity ratios in one of the bins.
DRYER
- Feeding belts with 20" wide canvas supported by 4" rollers in "V" with permanent lubrication. The gear box is hooked directly to the drum shaft. Drums are regulated with oscillating and shielded bearings. 3-hp electric motor.
- Conveyor belt in U-Beam, 24 wide canvas supported by 4 rollers in V shielded rollers actuated by a 7.5hp electric motor.
- Sieve with a screen for eliminating oversized materials.
- Drum dryer and mixer with heat insulation, four driven supports rollers made of high carbon steel driven by gear box, electric motor 15hp.
- rotational external mixer
- Terex CF04 burner with fuel spraying by gear pump 10.000.000 Kcal/h
- Dry filtering system that consists of dust collecting system
- Control system Sistex
complete offer and details by request * more machines, mixing plants and trucks on our website показать контакты